Monarch F6 Water Station
A floor-standing six-tap stainless station for Saudi factories and accommodation: 300 litres per hour chilled on the 500 W model, or 80 chilled plus 90 hot at 93–100 °C on the 2.5 kW model.
What it does.
- Chilled-only: 300 L/h at 5-10 °C from a 200 L cold tank
- Chilled & hot (2.5 kW): 80 L/h chilled plus 90 L/h hot at 93-100 °C
- Six knob faucets on one stainless station
- Hermetic Danfu compressor on R134a
- SS304 water tank with SS201 cabinet
- Same 1200 × 650 × 1300 mm cabinet for both versions
Typical applications
Monarch F6 Water Station in Saudi Arabia
Factories, warehouses and worker accommodation across the Kingdom need a robust, high-output source of cold drinking water. The chilled-only F6 gives 300 litres per hour from a 200 litre tank through six knob taps.
Where crews also need hot water, the 2.5 kW model adds 90 litres per hour at 93 to 100 °C. Both use the same 1200 × 650 × 1300 mm stainless cabinet and a hermetic R134a compressor.
Common questions
Which F6 model should I choose?
Chilled-only for the most cold water. The 2.5 kW model if you need hot water too, accepting a lower 80 litres per hour chilled.
How many people does it serve?
180 to 200 people a day.
What voltage does it run on?
220–240 V at 50 Hz.
Supplied, installed and serviced in Saudi Arabia
Saudi supply is a mix of desalinated water and groundwater. Where groundwater is blended in, as in Riyadh, the water can be hard enough to scale heaters and machines, so we check your supply before choosing a system.
Tell us your city, whether the site is on mains or tanker water, and what the system is for. We specify it, quote in riyals and install it.
Source: Al-Hamzah & Fellows, Water 16(13), 1810 (2024).
Where we work
- Riyadh
- Jeddah
- Across Saudi Arabia
Talk to the team
Interested in the Monarch F6 Water Station?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
